TT-280 Temperature Control Unit

img

TT-280 Temperature Control Unit

Contact For Pricing

ITEM NO: TT-280 Temperature Control Unit

CONDITION: NEW

MANUFACTURER: Tool-Temp

DESCRIPTION:

The TT-280 Temperature Control Unit is designed for use with oil up to 250?C. Follow the link below to find out more about the standard features and technical specifications of this Temperature Control Unit.

 

The TT-137 Temperature Control Unit is designed for use with Water up to 160°C. 

  Designed for maximum temperatures and optimum safety, the TT-137 temperature control unit can handle water temperatures up to 320°F/ 160 °C.  This unit is dutiable for molds in the plastic and die casting industries.  The closed, hot-water circuit with integral cold-water receiver in a large expansion tank eliminates the problem of cracking.  The TT-137 is guaranteed to be a leak-proof system with a leak-resistant pump, even at the maximum working temperature.  With its unique design and innovative technologies, this unit can be used and immediately switched off; there is no need to cool down the system.  All Tool-Temp temperature control units and water chillers are fitted with the self-optimizing microprocessor controller MP-888 (pictured above.)  The self-optimizing feature allows a very high regulating accuracy even at high temperatures and adheres to the set temperature independently of the consumer. 
 
Also available in other configuration as N, B, B/P Units with B Type pump ubnits that are without axial seals 
 
TT-137 N / TT-137 B / TT-137 B/BP
Pressurised water units with electronic flow control
Operational use: TT-137 N and TT-137 B: up to 140°C
TT-137 B/BP: up to 160°C (with pressure increasing pump)
 
Tecnical Data:
  • Heating capacity: 12 kW switchable in stages 6 / 6
  • Cooling capacity: approx. 80 kW
  • Pump capacity: N-pump: motor 1,8 kW, max. 5 bar / max. 110 l/min
  • B-pump: motor 1,8 kW, max. 6,5 bar / max. 110 l/min
  • Dimensions: Length: 870 x Width: 360 x Height: 915 mm
  • Weight: ca. 120 kg (empty)
Special features:
  • Digital flow indication: Indication of flow rate in litres and gallons and control of the minimum flow. As soon as the flow falls below a minimum, tha alarm is activated.
  • Pump model N:
  • Pume model B: Proven pump system with axial face seal
  • Pump with sealless magnetic drive
  • Leakstopper device and automatic mould drain: Unit can be used in pressure or vacuum mode
All components in contact with water are made of stainless steel. Pump made of bronze, Quality is equivalent to V2A.