TT-168 PHE Temperature Control Unit

img

TT-168 PHE Temperature Control Unit

Contact For Pricing

ITEM NO: TT-168 PHE Temperature Control Unit

CONDITION: NEW

MANUFACTURER: Tool-Temp

DESCRIPTION:

The TT-168 PHE Temperature Control Unit is designed for use with pressurized water up to 90°C or Thermo oil up to 150°C. Follow the link below to find out more about the standard features and technical specifications of this Temperature Control Unit.

 

TT-168 E/PHE
Special temperature control unit with extremely high cooling capacity and electronic flow control
Operational use: For temperatures from 20 - 50°C / 90°C.
 
Technical data:
  • Heating capacity: 12 kW or 18 kW
  • Cooling capacity: Standard heat exchanger: 50 kW at 90°C
  • Plate heat exchanger: 130 kW at 90°C
  • Pump capacity: Motor 0,75 kW, max. 4,5 bar / max. 75 l/min
  • Dimensions: Length: 980 x Width: 365 x Height: 750 mm, incl. castors
  • Gewicht: approx. 90 kg
Special features:
  • Digital flow indication: Indication of flow rate in litres and gallons and control of the minimum flow. As soon as the flow falls below a minimum, the alarm is activated.
  • Heat exchanger: The unit is equipped with 2 different heat exchangers that can be switched on if required. The standard heat exchanger is used at high temperatures and the plate heat exchanger can be switched on especially at lower temperatures
  • Leakstopper device and mould drain: Unit can be used in pressure or vacuum mode
All components in contact with water are made of stainless steel. Pump made of bronze, Quality is equivalent to V2A.

TECHNICAL SPECIFICATIONS:

Included Features

  • MP-888 microprocessor controller
  • Automatic temperature control that activates alarm when the actual temp deviates 5+ °C from the set temp
  • Automatic aeration / venting
  • Automatic water refill
  • Automatic mold drain
  • Switchable stages for varied heating capacities (3 kW oil operation to 9 kW water operation)
  • Highly audible alarm system
  • Leak stopper- operates in pressure or vacuum mode to allow continuous production despite leakage from mold or connections
  • Limescale-free heat exchanger
  • Corrosion-free unit.  All components in contact with water are made of stainless steel or bronze.
  • Castors
  • Safety Devices:
    • - Level control provides auto dry run protection
    • - Separate mechanical safety thermostat
    • - Temperature limiter installed in the controller
    • - Motor protection switch, transformer, insulation