ITEM NO: DLP / OK Downstroke End Loading Hot Press
CONDITION: NEW
MANUFACTURER: Joos
DESCRIPTION:
Joos Feed-Through Presses (DLP-OK DOWNSTROKE TYPE) are designed for the economical processing of veneer, plastic laminate, and composite materials.?This machine utilizes Elkom ?kotherm Plus heating platens to reach temperatures of 150 degrees Centigrade. Most parts can be processed in as little as 45 seconds. Our numerous patents make this machine one-of-a-kind in its field.?Working sizes range up to 5' x 10'.?The DLP can be configured for side-load and end-load capabilities.?They are also custom built for any operation you desire or require.
TECHNICAL SPECIFICATIONS:
| Models and technichal data: Following are typical models but any pressures and sizes can be accomodated on request |
||||||||
| DLP 100/OK | DLP 120/OK | DLP 150/OK | DLP 200/OK | |||||
 |
||||||||
| Pressing surface [mm] | 2550 x 1350 | 3150 x 1350 | 3150 x 1600 | 3800 x 1600 | ||||
|
||||||||
| Pressing surface [feet] | 8 x 4 | 10 x 4 | 10 x 5 | 12 x 5 | ||||
|
||||||||
| Working temperatures [?C] | 130 | 130 | 130 | 130 | ||||
|
||||||||
| Specific pressing power [kN/cm?] | 2.9 | 2.8 | 3.0 | 3.3 | ||||
|
||||||||
| Opening and stroke [mm] | 200 | 200 | 200 | 200 | ||||
|
||||||||
| Belt speed [m/min.] | 22 | 22 | 22 | 22 | ||||
|
||||||||
| Closing speed [m/min.] | 35 | 35 | 35 | 35 | ||||
|
||||||||
| Extra equipment available | YES | YES | YES | YES | ||||
|
||||||||
| Cycle time approx. [min.] (charging, pressen, discharging, regenerating) |
1.5 - 2.5 | 1.5 - 2.5 | 1.5 - 2.5 | 1.5 - 2.5 | ||||
|
||||||||
